R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

384
[Sysname] x25 switching
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ip address 10.1.1.1 255.255.255.0
[Sysname-Ethernet1/1] quit
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol x25 dce ietf
[Sysname-Serial2/0] x25 xot pvc 1 10.1.1.2 interface serial 2/0 pvc 2
Related commands
• display x25 vc
• x25 switching
x29 timer inviteclear-time
Use x29 timer inviteclear-time to set the delay waiting for response after the PAD clear procedure is
initiated. On expiration of this timer, the server aborts the connection by force and starts X.25 clear
procedures.
Use undo x29 timer inviteclear-time to restore the default.
Syntax
x29 timer inviteclear-time seconds
undo x29 timer inviteclear-time
Default
The delay waiting for response is 5 seconds.
Views
System view
Default command level
2: System level
Parameters
seconds: Delay time in seconds, in the range 5 to 2147483. The delay waiting for response after inviting
PAD clear procedure.
Usage guidelines
The server of X.25 PAD may send an Invite Clear message to the client, for example, after receiving a quit
request from client or in order to release the link. At the same time, a timer is started. If no response is
received on expiration of the timer, the server clears the link.
Examples
# Set the delay waiting for response after the PAD clear procedure is initiated to 1000 seconds.
<Sysname> system-view
[Sysname] x29 timer inviteclear-time 1000