R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

28
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
520 packets input, 44132 bytes, 0 drops
527 packets output, 44566 bytes, 4 drops
For the output description, see Table 1.
interface mp-group
Use interface mp-group to create an MP-group interface and enter MP-group interface view. If the
interface already exists, enter its view directly.
Use undo interface mp-group to remove an MP-group interface.
Syntax
interface mp-group mp-number
undo interface mp-group mp-number
Views
System view
Default command level
2: System level
Parameters
mp-number: MP-group interface number in the range of 0 to 1023.
Usage guidelines
You must use the interface mp-group command together with the ppp mp mp-group command. You can
execute the two commands in either order.
Examples
# Create MP group 3 interface.
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-Mp-group3]
interface virtual-template
Use interface virtual-template to create a VT and enter VT view. If the VT already exists, enter its view
directly.
Use undo interface virtual-template to remove a VT.
Syntax
interface virtual-template number
undo interface virtual-template number
Views
System view
Default command level
2: System level