R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

43
Examples
# Display the statistics on IPHC TCP header compression.
<Sysname> display ppp compression iphc tcp
IPHC: TCP/IP header compression
Interface: Serial2/0
Received:
Compress/Error/Discard/Total: 0/0/0/0 (Packets)
Sent:
Compress/Total: 0/0 (Packets)
Send/Save/Total: 0/0/0 (Bytes)
Connect:
Rx/Tx: 16/16
Long-search/Miss: 0/0
Table 4 Command output
Field Descri
p
tion
Received Statistics on received packets.
Compress/Error/Discard/Total: 0/0/0/0 (Packets)
The number of received
compressed/error/discarded/total packets is
0/0/0/0.
Sent Statistics on sent packets.
Compress/Total: 0/0 (Packets)
Send/Save/Total: 0/0/0 (Bytes)
The number of sent compressed/total packets is
0/0.
The bytes of sent/saved/total packets are
0/0/0.
Connect: Number of connections.
Rx
Number of connections that the receiver can
decompress.
Tx
Number of connections that the sender can
compress.
Long-search/Miss
Times of searching compression entries and
times of search failures.
display ppp compression stac-lzs
Use display ppp compression stac-lzs to display the statistics on STAC-LZS compression.
Syntax
display ppp compression stac-lzs [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level