R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

53
Parameters
number: Upper threshold for the PPPoE abnormal offline event count in 5 minutes, in the range of 0 to
65535.
Usage guidelines
If the PPPoE abnormal offline event count in the last 5 minutes exceeds this threshold, the system outputs
a trap message.
Examples
# Set the upper threshold for the PPPoE abnormal offline event count in 5 minutes to 100.
<Sysname> system-view
[Sysname] pppoe-server abnormal-offline-count threshold 100
pppoe-server abnormal-offline-percent threshold
Use pppoe-server abnormal-offline-percent threshold to set the upper threshold for the PPPoE abnormal
offline event percentage in 5 minutes.
Use undo pppoe-server abnormal-offline-percent threshold to restore the default.
Syntax
pppoe-server abnormal-offline-percent threshold number
undo pppoe-server abnormal-offline-percent threshold
Default
The upper threshold for the PPPoE abnormal offline event percentage in 5 minutes is 100.
Views
System view
Default command level
2: System level
Parameters
number: Upper threshold for the PPPoE abnormal offline event percentage, in the range of 0 to 100.
Usage guidelines
If the PPPoE abnormal offline event percentage in the last 5 minutes exceeds this threshold, the system
outputs a trap message.
PPPoE abnormal offline event percentage = 100 x Abnormal offline event count/(Abnormal offline event
count + Normal offline event count).
Examples
# Set the upper threshold for the PPPoE abnormal offline event percentage to 10.
<Sysname> system-view
[Sysname] pppoe-server abnormal-offline-percent threshold 10
Related commands
pppoe-server normal-offline-percent threshold