R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

56
Default command level
2: System level
Parameters
number: Maximum number of PPPoE sessions that the entire system can establish with a peer MAC
address, in the range of 1 to 4096.
Examples
# Set the maximum number of PPPoE sessions allowed with regard to a peer MAC address to 50.
<Sysname> system-view
[Sysname] pppoe-server max-sessions remote-mac 50
pppoe-server max-sessions total
Use pppoe-server max-sessions total to set the maximum number of PPPoE sessions allowed.
Use undo pppoe-server max-sessions total to restore the default.
Syntax
pppoe-server max-sessions total number
undo pppoe-server max-sessions total
Default
The maximum number of PPPoE sessions allowed is 4096.
Views
System view
Default command level
2: System level
Parameters
number: Maximum number of PPPoE sessions allowed, in the range of 1 to 65535.
Examples
# Set the maximum number of PPPoE sessions allowed to 3000 in the system.
<Sysname> system-view
[Sysname] pppoe-server max-sessions total 3000
pppoe-server normal-offline-percent threshold
Use pppoe-server normal-offline-percent threshold to set the lower threshold for the PPPoE normal offline
event percentage.
Use undo pppoe-server normal-offline-percent threshold to restore the default.
Syntax
pppoe-server normal-offline-percent threshold number
undo pppoe-server normal-offline-percent threshold
Default
The lower threshold for the PPPoE normal offline event percentage is 0.