R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

58
Syntax
display pppoe-client session { packet | summary } [ dial-bundle-number number ] [ | { begin | exclude
| include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
packet: Displays the packet statistics on PPPoE sessions.
summary: Displays PPPoE session summary.
dial-bundle-number number: Displays the statistics on a PPPoE session. The number argument is in the
range of 1 to 255. If this option is not specified, this command displays the statistics on all the PPPoE
sessions.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display PPPoE session summary.
<Sysname> display pppoe-client session summary
PPPoE Client Session:
ID Bundle Dialer Intf RemMAC LocMAC State
1 1 1 Eth1/1 00e014004300 00e015004100 PPPUP
1 2 2 Eth1/2 00e015004300 00e016004100 PPPUP
Table 7 Command output
Field Descri
p
tion
ID PPPoE session ID.
Bundle Dialer bundle to which a PPPoE session belongs.
Dialer Dialer interface corresponding to a PPPoE session.
Intf Ethernet interface where the PPPoE session is present.
RemMAC Remote MAC address.
LocMAC Local MAC address.
State
PPPoE session state. PPPoE session state is the PPP protocol state.
PPPUP indicates that PPP negotiation is successful.
# Display the packet statistics on PPPoE sessions.
<Sysname> display pppoe-client session packet
PPPoE Client Session: