R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

69
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Executing this command will display information of the calls activated up to now, but the number of
retained entries is limited to 100.
Examples
# Display the information of ISDN call history.
<Sysname> display isdn call-record
-------------------------------------------------------------------------------
Call Calling Called Start Stop Seconds
Type Number Number Time Time Used
-------------------------------------------------------------------------------
In 10660016 10660016 03-07-05 11:23:09 - 0
In 10660022 10660022 03-07-05 11:23:09 - 0
Out - 660016 03-07-05 11:23:01 03-07-05 11:23:04 3
Out - 660022 03-07-05 11:23:01 03-07-05 11:23:04 3
In 10660016 10660016 03-07-05 11:23:01 03-07-05 11:23:04 3
In 10660022 10660022 03-07-05 11:23:01 03-07-05 11:23:04 3
Table 11 Command output
Field Descri
p
tion
Call Type
Call type:
• Incoming.
• Outgoing.
Start Time Time at which the call is set up.
Stop Time Time at which the call is terminated.
Seconds Used Duration of the call in seconds.
display isdn parameters
Use display isdn parameters to view the system parameters at Layer 2 and Layer 3 of the ISDN protocol,
such as the system timers and frame size.
Syntax
display isdn parameters { protocol | interface interface-type interface-number } [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
protocol: ISDN protocol type, which can be 5ess, ans, at&t, dss1, etsi, ni, ni2, ntt, or qsig.
interface interface-type interface-number: Specifies an interface by its type and number.