R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

77
isdn carry connected-name
Use isdn carry connected-name to configure ISDN to carry the Calling-Name field in outgoing packets
of the interface.
Use undo isdn carry connected-name to restore the default.
Syntax
isdn carry connected-name
undo isdn carry connected-name
Default
ISDN does not carry the Connected-Name field in outgoing packets.
Views
ISDN interface view
Default command level
2: System level
Examples
# Configure ISDN to carry the Connected-Name field in outgoing packets on interface BRI 2/0.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn carry connected-name
isdn check-called-number
Use isdn check-called-number to configure the called number or subaddress that the system should verify
when receiving a digital call.
Use undo isdn check-called-number to remove the configuration.
Syntax
isdn check-called-number check-index called-party-number [ : subaddress ]
undo isdn check-called-number check-index
Default
The system does not check the called number or subaddress carried by incoming digital calls.
Views
ISDN interface view
Default command level
2: System level
Parameters
check-index: Called number or subaddress checking index, which is in the range of 1 to 3.
called-party-number: Called number, a string of 1 to 20 digits.
subaddress: Subaddress, which is a string of 1 to 20 digits, case-insensitive English letters, or both.