R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

97
Field Descri
p
tion
State Interface state.
Type Type: virtual link.
Transit Area Transit area ID.
Timers Timers: Hello, dead, retransmit, and interface transmission delay.
MD5 authentication enabled Authentication mode of the virtual link.
The last key Most recent MD5 authentication key ID.
neighbor(s) left Number of neighbors that have not completed MD5 key rollover.
display router id
Use display router id to display the global router ID.
Syntax
display router id [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the global router ID.
<Sysname> display router id
Configured router ID is 1.1.1.1
enable link-local-signaling
Use enable link-local-signaling to enable the OSPF link-local signaling (LLC) capability.
Use undo enable link-local-signaling to disable the OSPF link-local signaling capability.
Syntax
enable link-local-signaling
undo enable link-local-signaling
Default
This capability is disabled.