R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

98
Views
OSPF view
Default command level
2: System level
Examples
# Enable link-local signaling for OSPF process 1.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] enable link-local-signaling
enable log
Use enable log to enable specified OSPF logging.
Use undo enable log to disable specified OSPF logging.
Syntax
enable log [ config | error | state ]
undo enable log [ config | error | state ]
Default
OSPF logging is disabled.
Views
OSPF view
Default command level
2: System level
Parameters
config: Enables configuration logging.
error: Enables error logging.
state: Enables state logging.
Usage guidelines
If no keyword is specified, all logging is enabled.
Examples
# Enable OSPF logging.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] enable log
enable out-of-band-resynchronization
Use enable out-of-band-resynchronization to enable the OSPF out-of-band resynchronization
(OOB-Resynch) capability.
Use undo enable out-of-band-resynchronization to disable the OSPF out-of-band resynchronization
capability.