R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

115
ospf dr-priority
Use ospf dr-priority to set the priority for DR/BDR election on an interface.
Use undo ospf dr-priority to restore the default value.
Syntax
ospf dr-priority priority
undo ospf dr-priority
Default
The priority is 1.
Views
Interface view
Default command level
2: System level
Parameters
priority: Specify the DR priority of the interface, in the range of 0 to 255.
Usage guidelines
The bigger the value, the higher the priority. If a device has a priority of 0, it will not be elected as a DR
or BDR.
Examples
# Set the DR priority on an interface to 8.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ospf dr-priority 8
ospf mib-binding
Use ospf mib-binding to bind an OSPF process to MIB operation for responding to SNMP requests.
Use undo ospf mib-binding to restore the default.
Syntax
ospf mib-binding process-id
undo ospf mib-binding
Default
MIB operation is bound to the OSPF process with the smallest process ID.
Views
System view
Default command level
2: System level
Parameters
process-id: Specifies an OSPF process ID in the range of 1 to 65535.