R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

127

snmp-agent trap enable ospf

Use snmp-agent trap enable ospf to enable the sending of SNMP traps for a specified OSPF process. If

no process is specified, the feature is enabled for all processes.

Use undo snmp-agent trap enable ospf to disable the feature.

Syntax

snmp-agent trap enable ospf [ process-id ] [ ifauthfail | ifcfgerror | ifrxbadpkt | ifstatechange |

undo snmp-agent trap enable ospf [ process-id ] [ ifauthfail | ifcfgerror | ifrxbadpkt | ifstatechange |

Default

This feature is enabled.

Views

System view

Default command level

3: Manage level

Parameters

process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.

ifauthfail: Specifies interface authentication failure information.

ifcfgerror: Specifies interface configuration error information.

ifrxbadpkt: Specifies information about error packets received.

ifstatechange: Specifies interface state change information.

iftxretransmit: Specifies packet receiving and forwarding information.

lsdbapproachoverflow: Specifies information about cases approaching LSDB overflow.

lsdboverflow: Specifies LSDB overflow information.

maxagelsa: Specifies LSA max age information.

nbrstatechange: Specifies neighbor state change information.

originatelsa: Specifies information about LSAs originated locally.

vifauthfail: Specifies virtual interface authentication failure information.

vifcfgerror: Specifies virtual interface configuration error information.

virifauthfail: Specifies virtual interface authentication failure information.

virifrxbadpkt: Specifies information about error packets received by virtual interfaces.

virifstatechange: Specifies virtual interface state change information.

viriftxretransmit: Specifies virtual interface packet retransmission information.

virnbrstatechange: Specifies virtual interface neighbor state change information.