R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

143
TE Cost : 0
TE Admin Group : 0
TE Max Bandwidth : 0
TE Max Res Bandwidth : 0
LDP-sync : Enabled
Hold Down Time : L12 33
Max Cost Time : L12 22
LDP-sync State : L1 Init L2 Init
# Displays detailed information of the specified IS-IS interface.
<Sysname> display isis interface tunnel 1 verbose
Interface information for ISIS(1)
---------------------------------
Interface: Tunnel1
Id IPv4.State IPv6.State MTU Type DIS
005 Up Down 16384L1/L2 --
SNPA Address : 0000-0000-0000
IP Address : 10.1.1.4
Secondary IP Address(es) :
IPv6 Link Local Address :
IPv6 Global Address(es) :
Csnp Timer Value : L1 10 L2 10
Hello Timer Value : 10
Hello Multiplier Value : 3
Lsp Timer Value : L12 33
Lsp Transmit-Throttle Count : L12 5
Cost : L1 10 L2 10
Priority : L1 64 L2 64
Retransmit Timer Value : L12 5
BFD : Disabled
Tunnel L1 State : OFF
Tunnel L2 State : ON
Tunnel Type : AA
Tunnel Metric : 0
Destination Router ID : 5.5.5.5
LDP-sync : Enabled
Hold Down Time : L12 33
Max Cost Time : L12 22
LDP-sync State : L12 Init
Table 32 Command output
Field Descri
p
tion
Interface Interface type and number.
Id Circuit ID.
IPV4.State IPv4 state.
IPV6.State IPv6 state.