R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

147
1000.0000.0001.00-00* 0x00000016 0x314e 1130 112 0/0/0
SOURCE 1000.0000.0001.00
NLPID IPV4
NLPID IPV6
AREA ADDR 10
INTF ADDR 3.1.1.20
INTF ADDR V6 3::20
+NBR ID
1000.0000.0002.01 COST: 63
SOURCE 1000.0000.0001.00
+IP-Extended
3.1.1.0 255.255.255.0 COST: 63
SOURCE 1000.0000.0002.00
NLPID IPV4
NLPID IPV6
AREA ADDR 10
INTF ADDR 3.1.1.21
INTF ADDR V6 3::21
+NBR ID
1000.0000.0002.01 COST: 10
SOURCE 1000.0000.0002.00
+IP-Extended
3.1.1.0 255.255.255.0 COST: 10
SOURCE 1000.0000.0002.01
NLPID IPV4
NLPID IPV6
+NBR ID
1000.0000.0002.00 COST: 0
+NBR ID
1000.0000.0001.00 COST: 0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
Table 34 Command output
Field Descri
p
tion
LSPID Link state packet ID.
Seq Num LSP sequence number.
Checksum LSP checksum.
Holdtime LSP lifetime which decreases as time elapses.
Length LSP length.
ATT/P/OL
• ATT—Attach bit.
• P—Partition bit.
• OL—Overload bit.
1 means the LSP bit is set and 0 means the LSP bit is not set.
SOURCE System ID of the originating router.
NLPID Network layer protocol the originating router runs.