R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

154
-----------------------------
ISIS(1) IPv4 Level-1 Forwarding Table
-------------------------------------
IPV4 Destination IntCost ExtCost ExitInterface NextHop Flags
--------------------------------------------------------------------------
1.1.0.0/16 20 NULL Eth1/1 1.2.1.1 R/L/-
1.2.0.0/16 10 NULL Eth1/1 Direct D/L/-
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
ISIS(1) IPv4 Level-2 Forwarding Table
-------------------------------------
IPV4 Destination IntCost ExtCost ExitInterface NextHop Flags
--------------------------------------------------------------------------
1.1.0.0/16 20 NULL
1.2.0.0/16 10 NULL Eth1/1 Direct D/L/-
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Table 39 Command output
Field Descri
p
tion
Route information for ISIS(1) Route information for IS-IS process 1.
ISIS(1) IPv4 Level-1 Forwarding Table IS-IS IPv4 routing information for Level-1.
ISIS(1) IPv4 Level-2 Forwarding Table IS-IS IPv4 routing information for Level-2.
IPv4 Destination IPv4 destination address.
IntCost Interior routing cost.
ExtCost Exterior routing cost.
ExitInterface Exit interface.
NextHop Next hop.
Flags
Routing state flag:
• D—Direct route.
• R—The route has been added into the routing
table.
• L—The route has been advertised in an LSP.
• U—A route's penetration flag. Setting it to UP can
prevent an LSP sent from L2 to L1 from being sent
back to L2.
# Display detailed IS-IS IPv4 routing information.
<Sysname> display isis route verbose
Route information for ISIS(1)
-----------------------------