R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

160
Table 42 Command output
Field Descri
p
tion
Statistics information for ISIS(processid) Statistics for the IS-IS process.
Level-1 Statistics Level-1 statistics.
Level-2 Statistics Level-2 statistics.
Learnt routes information
Number of learned IPv4 routes.
Number of learned IPv6 routes.
Imported routes
information
MTR(Basic-V4)
IPv4 Imported Routes.
Counts of redistributed IPv4 routes
MTR(Basic-V6)
IPv6 Imported Routes.
Counts of redistributed IPv6 routes
MTR(voice)
IPv4 Imported Routes.
Counts of redistributed IPv4 routes from topology voice
Lsp information
LSP information:
• LSP Source ID—ID of the source system.
• No. of used LSPs—Number of used LSPs.
domain-authentication-mode
Use domain-authentication-mode to specify the routing domain authentication mode and a password.
Use undo domain-authentication-mode to restore the default.
Syntax
domain-authentication-mode { md5 | simple } [ cipher ] password [ ip | osi ]
undo domain-authentication-mode
Default
No routing domain authentication is configured.
Views
IS-IS view
Default command level
2: System level
Parameters
md5: Specifies the MD5 authentication mode.
simple: Specifies the simple authentication mode.
cipher: Sets a ciphertext password. If this keyword is not specified, you set a plaintext password.
password: Set the password. This argument is case sensitive. It must be a plaintext string of 1 to 16
characters, or a ciphertext string of 33 to 53 characters.
ip: Checks IP related fields in LSPs.
osi: Checks OSI related fields in LSPs.