R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

169
Default command level
2: System level
Parameters
number: Maximum number of redistributed Level 1/Level 2 IPv4 routes.
Usage guidelines
All MSR routers support the command, but they have different values ranges and default values:
MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
Value range:
1 to 10000
Default:
10000
Value
range: 1 to
10000
Default:
10000
Value range:
1 to 10000
Default:
10000
Value
range: 1 to
5000
Default:
5000
Value range:
1 to 10000
Default:
10000
• MPUF
Value range: 1
to 30000
Default: 30000
• MPU-G2
Value range: 1
to 50000
Default: 50000
Value
range: 1 to
10000
Default:
10000
Examples
# Configure IS-IS process 1 to redistribute up to 1000 Level 1/Level 2 IPv4 routes.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] import-route limit 1000
isis
Use isis to enable an IS-IS process and specify an associated VPN instance, enter IS-IS view, or both.
Use undo isis to disable an IS-IS process.
Syntax
isis [ process-id ] [ vpn-instance vpn-instance-name ]
undo isis [ process-id ]
Views
System view
Default command level
2: System level
Parameters
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. The default is 1.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the IS-IS process belongs to the public network.
Examples
# Enable IS-IS routing process 1, with the system ID being 0000.0000.0002, and area ID being
01.0001.
<Sysname> system-view