R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

185
Syntax
is-name map sys-id map-sys-name
undo is-name map sys-id
Views
IS-IS view
Default command level
2: System level
Parameters
sys-id: System ID or pseudonode ID of a remote IS.
map-sys-name: Specifies a host name for the remote IS, a string of 1 to 64 characters.
Usage guidelines
Each remote IS system ID corresponds to only one name.
Examples
# Map the host name RUTB to the system ID 0000.0000.0041 of the remote IS.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB
is-snmp-traps enable
Use is-snmp-traps enable to enable the SNMP Trap function of IS-IS.
Use undo is-snmp-traps to disable this function.
Syntax
is-snmp-traps enable
undo is-snmp-traps
Default
SNMP Trap is enabled.
Views
IS-IS view
Default command level
2: System level
Examples
# Enable SNMP Trap.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] is-snmp-traps enable
log-peer-change (IS-IS view)
Use log-peer-change to enable the logging of IS-IS neighbor state changes.