R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

7
10.1.2.0/24 Direct 0 0 10.1.2.1 Eth1/2
10.1.2.1/32 Direct 0 0 127.0.0.1 InLoop0
10.1.3.0/24 Direct 0 0 10.1.3.1 Eth1/1
10.1.3.1/32 Direct 0 0 127.0.0.1 InLoop0
For descriptions of the output, see Table 1.
# Display detailed information about both active and inactive routes permitted by basic ACL 2000.
<Sysname> display ip routing-table acl 2000 verbose
Routes Matched by Access list : 2000
Summary Count: 6
Destination: 10.1.1.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 10.1.1.2 Interface: Vlan-interface1
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 1d00h25m32s
Tag: 0
Destination: 10.1.1.2/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 127.0.0.1 Interface: InLoopBack0
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 1d00h41m34s
Tag: 0
Destination: 10.1.2.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 10.1.2.1 Interface: Ethernet1/2
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 1d00h05m42s
Tag: 0
Destination: 10.1.2.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 127.0.0.1 Interface: InLoopBack0