R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

8
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 1d00h05m42s
Tag: 0
Destination: 10.1.3.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 10.1.3.1 Interface: Ethernet1/1
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 1d00h05m31s
Tag: 0
Destination: 10.1.3.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 127.0.0.1 Interface: InLoopBack0
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 1d00h05m32s
Tag: 0
For descriptions of the output, see Table 2.
display ip routing-table ip-address
Use display ip routing-table ip-address to display information about the route to the specified destination
address.
Use display ip routing-table ip-address1 { mask-length | mask } ip-address2 { mask-length | mask } to
display information about active routes to a range of destination addresses.
Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] ip-address [ mask | mask-length ]
[ longer-match ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
display ip routing-table [ vpn-instance vpn-instance-name ] ip-address1 { mask | mask-length }
ip-address2 { mask | mask-length } [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level