R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

212
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2.2.2.1 200 0 0 0 0 00:00:35 Active
Table 44 Command output
Field Description
BGP peer-group Name of the BGP peer group.
Remote AS AS number of peer group.
type
Type of the BGP peer group:
• IBGP.
• EBGP.
Maximum allowed prefix number Maximum prefixes allowed to receive from the peer group.
Threshold
Percentage of received prefixes from the peer group to
maximum prefixes allowed to receive from the peer group; If
the percentage is reached, the system generates alarm
messages.
Configured hold timer value Holdtime interval.
Keepalive timer value Keepalive interval.
Minimum time between advertisement runs Minimum interval for route advertisements.
Peer Preferred Value Preferred value specified for the routes from the peer.
No routing policy is configured No routing policy is configured.
Members Detailed information about the members in the peer group.
Peer IPv4 address of the peer.
V BGP version running on the peer.
AS AS number of the peer.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent.
PrefRcv Number of prefixes received.
Up/Down
Duration of the session/duration of the current state (when no
session is established).
State State machine state of the peer.
display bgp network
Use display bgp network to display routing information advertised with the network command.
Syntax
display bgp network [ | { begin | exclude | include } regular-expression ]