R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

231
display router id
Use display router id to display the global router ID.
Syntax
display router id [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the global router ID.
<Sysname> display router id
Configured router ID is 1.1.1.1
ebgp-interface-sensitive
Use ebgp-interface-sensitive to enable quick reestablishment of direct EBGP session.
Use undo ebgp-interface-sensitive to disable the function.
Syntax
ebgp-interface-sensitive
undo ebgp-interface-sensitive
Default
This function is enabled.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Usage guidelines
When the link to a directly connected EBGP peer is down, the router, with quick EBGP session
reestablishment enabled, tears down the session to the peer, and then immediately reestablishes a
session. If the function is not enabled, the router does not tear down the session until the holdtime times
out. A route flap does not affect the EBGP session state when the quick EBGP session reestablishment is
disabled.