R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

236
Related commands
graceful-restart
graceful-restart timer wait-for-rib
Use graceful-restart timer wait-for-rib to configure the time to wait for the End-of-RIB marker on the local
end.
Use undo graceful-restart timer wait-for-rib to restore the default.
Syntax
graceful-restart timer wait-for-rib timer
undo graceful-restart timer wait-for-rib
Default
The time to wait for the End-of-RIB marker is 180 seconds.
Views
BGP view
Default command level
2: System level
Parameters
timer: Specifies the time to wait for the End-of-RIB marker, in the range of 3 to 300 seconds.
Usage guidelines
After a BGP session has been successfully (re)established, the End-of-RIB marker must be received within
the time specified with this command.
Using this command can speed up route convergence.
Before configuring this command, you must enable the BGP Graceful Restart capability.
Examples
# Set the time to wait for the End-of-RIB marker on the local end to 100 seconds.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] graceful-restart timer wait-for-rib 100
Related commands
graceful-restart
group (BGP/BGP-VPN instance view)
Use group to create a peer group.
Use undo group to delete a peer group.
Syntax
group group-name [ external | internal ]
undo group group-name