R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

255
peer enable (BGP/BGP-VPN instance view)
Use peer enable to enable the specified peer.
Use undo peer enable to disable the specified peer.
Syntax
peer ip-address enable
undo peer ip-address enable
Default
The BGP peer is enabled.
Views
BGP view, BGP VPN instance view
Default command level
2: System level
Parameters
ip-address: Specifies the IP address of a peer.
Usage guidelines
If a peer is disabled, the router does not exchange routing information with the peer.
Examples
# Disable peer 18.10.0.9.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 18.10.0.9 group group1
[Sysname-bgp] undo peer 18.10.0.9 enable
peer fake-as (BGP/BGP-VPN instance view)
NOTE:
The peer fake-as command is only applicable to an EBGP peer or peer group.
Use peer fake-as to configure a fake local AS number for a peer or peer group.
Use undo peer fake-as to restore the default.
Syntax
peer { group-name | ip-address } fake-as as-number
undo peer { group-name | ip-address } fake-as
Default
No fake local AS number is configured for a peer or peer group.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level