R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

261
# In BGP-VPN instance view, enable the logging of session state and event information for peer group
test. (The VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test log-change
peer next-hop-local (BGP/BGP-VPN instance view)
Use peer next-hop-local to specify the router as the next hop for routes sent to a peer or peer group.
Use undo peer next-hop-local to remove the configuration.
Syntax
peer { group-name | ip-address } next-hop-local
undo peer { group-name | ip-address } next-hop-local
Default
Routes advertised to an EBGP peer or peer group take the local router as the next hop, and routes sent
to an IBGP peer or peer group do not take the local router as the next hop.
Views
BGP view /BGP-VPN instance view
Default command level
2: System level
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies the IP address of a peer.
Examples
# In BGP view, set the next hop of routes advertised to peer group test to the router itself.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test next-hop-local
# In BGP-VPN instance view, set the next hop of routes advertised to peer group test to the router itself.
(The VPN has been created)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test next-hop-local
peer password
Use peer password to enable MD5 authentication for BGP peers.
Use undo peer password to disable the function.
Syntax
peer { group-name | ip-address } password { cipher | simple } password