R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

273
• reflect between-clients
refresh bgp
Use refresh bgp to perform soft reset on specified BGP sessions.
Syntax
refresh bgp { ip-address | all | group group-name | external | internal } { export | import }
Views
User view
Default command level
1: Monitor level
Parameters
ip-address: Soft-resets the BGP session to a peer.
all: Soft-resets all BGP sessions.
group-name: Soft-resets sessions to a peer group, name of which is a sting of 1 to 47 characters.
external: Specifies an EBGP session.
internal: Specifies an IBGP session.
export: Specifies the outbound soft reset.
import: Specifies the inbound soft reset.
Usage guidelines
Using this function can refresh the BGP routing table without tearing down BGP sessions and apply a
newly configured routing policy.
To perform BGP soft reset, all routers in the network must support route-refresh. If a router not supporting
route-refresh exists in the network, you need to configure the peer keep-all-routes command to save all
route updates before performing soft reset.
Examples
# Perform inbound BGP soft reset.
<Sysname> refresh bgp all import
reset bgp
Use reset bgp to reset specified BGP sessions.
Syntax
reset bgp { as-number | ip-address | all | external | group group-name | internal }
Views
User view
Default command level
2: System level
Parameters
as-number: Resets BGP sessions to peers in the AS.