R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

16
Field Descri
p
tion
Protocol Routing protocol.
Cost Route cost.
display ipv6 routing-table acl
Use display ipv6 routing-table acl to display routing information permitted by the IPv6 ACL.
Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] acl acl6-number [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed.
acl6-number: Specifies a basic IPv6 ACL by its number in the range of 2000 to 2999.
verbose: Displays detailed information about both active and inactive routes permitted by the ACL.
Without this keyword, only brief information about active routes is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If the specified IPv6 ACL is not available, all routing information is displayed.
Examples
# Display brief routing information permitted by ACL 2000.
<Sysname> display ipv6 routing-table acl 2000
Routes Matched by Access list 2000 :
Summary Count : 2
Destination : ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination : 1:1::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0