R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

285
apply isis
Use apply isis to redistribute routes into a specified ISIS level.
Use undo apply isis to remove the clause configuration.
Syntax
apply isis { level-1 | level-1-2 | level-2 }
undo apply isis
Default
No IS-IS level is set.
Views
Routing policy view
Default command level
2: System level
Parameters
level-1: Redistributes routes into IS-IS level-1.
level-1-2: Redistributes routes into both IS-IS level-1 and level-2.
level-2: Redistributes routes into IS-IS level-2.
Examples
# Configure node 10 in permit mode of routing policy policy1. If a route has a tag of 8, redistribute the
route to IS-IS level-2.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match tag 8
[Sysname-route-policy] apply isis level-2
apply local-preference
Use apply local-preference to configure the specified local preference for BGP routes.
Use undo apply local-preference to remove the clause configuration.
Syntax
apply local-preference preference
undo apply local-preference
Default
No local preference is configured for BGP routing information.
Views
Routing policy view
Default command level
2: System level