R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

335
Examples
# Display the routing information of RIPng process 100.
<Sysname> display ripng 100 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::200:5EFF:FE04:B602 on Ethernet1/1
Dest 3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B602, cost 2, tag 0, A, 34 Sec
Dest 3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost 2, tag 0, A, 34 Sec
Peer FE80::200:5EFF:FE04:B601 on Ethernet1/2
Dest 3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B601, cost 2, tag 0, A, 13 Sec
Dest 3FFE:C00:C18:3::/64,
via FE80::200:5EFF:FE04:B601, cost 2, tag 0, A, 13 Sec
Peer FE80::200:5EFF:FE04:3302 on Ethernet1/3
Dest 100::/32,
via FE80::200:5EFF:FE04:3302, cost 2, tag 0, A, 6 Sec
Dest 4000:1::/64,
via FE80::200:5EFF:FE04:3302, cost 2, tag 0, A, 6 Sec
Dest 4000:2::/64,
via FE80::200:5EFF:FE04:3302, cost 2, tag 0, A, 6 Sec
Dest 4000:3::/64,
via FE80::200:5EFF:FE04:3302, cost 2, tag 0, A, 6 Sec
Dest 4000:4::/64,
Table 67 Command output
Field Descri
p
tion
Peer Neighbor connected to the interface.
Dest IPv6 destination address.
via Next hop IPv6 address.
cost Routing metric value.
tag Route tag.
Sec Time that a route entry stays in a particular state.
"A" The route is in aging state.
"S" The route is in suppressed state.
"G" The route is in Garbage-collect state.
enable ipsec-policy (RIPng view)
Use enable ipsec-policy to apply an IPsec policy in a RIPng process.