R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

344
ripng ipsec-policy
Use ripng ipsec-policy to apply an IPsec policy on a RIPng interface.
Use undo ripng ipsec-policy to remove the IPsec policy from the RIPng interface.
Syntax
ripng ipsec-policy policy-name
undo ripng ipsec-policy
Default
No IPsec policy is configured for the RIPng interface.
Views
Interface view
Default command level
2: System level
Parameters
policy-name: IPsec policy name, a string of 1 to 15 characters.
Usage guidelines
The IPsec policy to be applied must have been configured.
Examples
# Apply IPsec policy policy001 to interface Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ripng ipsec-policy policy001
ripng metricin
Use ripng metricin to specify an additional metric for received RIPng routes.
Use undo ripng metricin to restore the default.
Syntax
ripng metricin value
undo ripng metricin
Default
The additional metric to received routes is 0.
Views
Interface view
Default command level
2: System level
Parameters
value: Adds an additional metric to received routes, in the range of 0 to 16.