R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

23
Destination : ::1 PrefixLength : 128
NextHop : ::1 Preference : 0
IpPrecedence : QosLcId :
RelayNextHop : :: Tag : 0H
Neighbor : :: ProcessID : 0
Interface : InLoopBack0 Protocol : Direct
State : Active NoAdv Cost : 0
Tunnel ID : 0x0 Label : NULL
Age : 22161sec
Table 6 Command output
Field Descri
p
tion
Destination Destination IPv6 address
PrefixLength Prefix length of the address
NextHop Next hop
Preference Route priority
IpPrecedence IP precedence
QosLcId QoS-local ID
RelayNextHop Recursive next hop
Tag Tag of the route
Neighbor Neighbor address
ProcessID Process ID
Interface Outbound interface
Protocol Routing protocol
State
State of the route, Active, Inactive, Adv (advertised), or NoAdv (not
advertised)
Cost Cost of the route
Tunnel ID Tunnel ID
Label Label
Age Time that has elapsed since the route was generated
display load-sharing ip address
Use display load-sharing ip address to display interface-bandwidth-based load sharing statistics for a
destination.
Syntax
display load-sharing ip address ip-address { mask | mask-length } [ | { begin | exclude | include }
regular-expression ]
Views
Any view