R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

358
Field Descri
p
tion
Adjacent neighbor count Number of Adjacencies on the interface.
IPsec policy name IPsec policy used on the interface.
SPI SPI defined in the IPsec policy.
BFD BFD status on the interface (enabled or disabled).
display ospfv3 lsdb
Use display ospfv3 lsdb to display OSPFv3 LSDB information.
Syntax
display ospfv3 [ process-id ] lsdb [ { external | grace | inter-prefix | inter-router | intra-prefix | link |
network | router } [ link-state-id ] [ originate-router router-id ] | total ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
external: Displays information about AS-external LSAs.
grace: Displays information about Grace-LSAs.
inter-prefix: Displays information about Inter-area-prefix LSAs.
inter-router: Displays information about Inter-area-router LSAs.
intra-prefix: Displays information about Intra-area-prefix LSAs.
link: Displays information about Link-LSAs.
network: Displays information about Network-LSAs.
router: Displays information about Router-LSAs.
link-state-id: Specifies a link state ID, an IPv4 address.
originate-router router-id: Specifies the ID of the advertising router.
total: Displays the LSA statistics in the LSDB.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.