R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

26
Default
The load sharing bandwidth of an interface is the physical bandwidth of the interface.
Views
Layer 3 Ethernet interface view, Layer 3 Ethernet subinterface view, VLAN interface view
Default command level
2: System view
Examples
# Configure the load sharing bandwidth of the interface.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname–Ethernet1/1] load-bandwidth 100
reset ip routing-table statistics protocol
Use reset ip routing-table statistics protocol to clear statistics of the routing table.
Syntax
reset ip routing-table statistics protocol [ vpn-instance vpn-instance-name ] { protocol | all }
Views
User view
Default command level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the routing statistics of the public network is cleared.
protocol: Clears route statistics for the IPv4 routing protocol, which can be bgp, direct, isis, ospf, rip, or
static.
all: Clears route statistics for all IPv4 routing protocols.
Examples
# Clear statistics in the routing table of VPN instance Sysname1.
<Sysname> reset ip routing-table statistics protocol vpn-instance Sysname1 all
reset ipv6 routing-table statistics
Use reset ipv6 routing-table statistics to clear statistics of the IPv6 routing table.
Syntax
reset ipv6 routing-table statistics protocol [ vpn-instance vpn-instance-name ] { protocol | all }
Views
User view
Default command level
2: System level