R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

379
Syntax
graceful-restart helper strict-lsa-checking
undo graceful-restart helper strict-lsa-checking
Default
Strict LSA checking for the GR helper is disabled.
Views
OSPFv3 view
Default command level
2: System level
Usage guidelines
When an LSA change on the GR helper is detected, the GR helper device exits the GR helper mode.
Examples
# Enable strict LSA checking for the GR helper in OSPFv3 process 1.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] graceful-restart helper strict-lsa-checking
import-route (OSPFv3 view)
Use import-route to redistribute routes.
Use undo import-route to disable routes redistribution.
Syntax
import-route protocol [ process-id | allow-ibgp ] [ cost value | route-policy route-policy-name | type
type ] *
undo import-route protocol [ process-id ]
Default
OSPFv3 does not redistribute routes from other protocols.
Views
OSPFv3 view
Default command level
2: System level
Parameters
protocol: Redistributes routes from a specified routing protocol, which can be bgp4+, direct, isisv6,
ospfv3, ripng, or static.
process-id: Specifies the process ID of a routing protocol, in the range of 1 to 65536. The default is 1. This
argument takes effect only when the protocol is isisv6, ospfv3, or ripng.
allow-ibgp: Allows redistributing IBGP routes. This keyword takes effect only the protocol is bgp4+.
cost value: Specifies a cost for redistributed routes, in the range of 1 to 16777214. The default is 1.