R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

381
Syntax
maximum load-balancing maximum
undo maximum load-balancing
Views
OSPFv3 view
Default command level
2: System level
Parameters
maximum: Specifies the maximum number of ECMP routes.
Examples
# Configure the maximum number of ECMP routes as 6.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] maximum load-balancing 6
ospfv3
Use ospfv3 to enable an OSPFv3 process and enter OSPFv3 view.
Use undo ospfv3 to disable an OSPFv3 process.
Syntax
ospfv3 [ process-id ] [ vpn-instance vpn-instance-name ]
undo ospfv3 [ process-id ]
Default
The system runs no OSPFv3 process.
Views
System view
Default command level
2: System level
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. The default process ID is
1.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the OSPFv3 process belongs to the public network. You can
enable up to 10 OSPFv3 processes in a VPN instance.
Usage guidelines
An OSPFv3 process can run correctly only when router ID is configured in OSPFv3 view. Otherwise, you
can find the process, but which cannot generate any LSA.
Examples
# Enable the OSPFv3 process with process ID as 120 and configure the Router ID as 1.1.1.1.
<Sysname> system-view