R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

388
ospfv3 timer hello
Use ospfv3 timer hello to configure the hello interval for an interface that belongs to an instance.
Use undo ospfv3 timer hello to restore the default.
Syntax
ospfv3 timer hello seconds [ instance instance-id ]
undo ospfv3 timer hello [ seconds ] [ instance instance-id ]
Default
The hello interval is 10 seconds for P2P and Broadcast interfaces and is not supported on the P2MP or
NBMA interfaces.
Views
Interface view
Default command level
2: System level
Parameters
seconds: Specifies the interval between hello packets, in the range of 1 to 65535 seconds.
instance-id: Specifies an instance by its ID in the range of 0 to 255. The default is 0.
Examples
# Configure the hello interval as 20 seconds for an interface in instance 1.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ospfv3 timer hello 20 instance 1
Related commands
ospfv3 timer dead
ospfv3 timer retransmit
Use ospfv3 timer retransmit to configure the LSA retransmission interval for an interface in an instance.
Use undo ospfv3 timer retransmit to restore the default.
Syntax
ospfv3 timer retransmit interval [ instance instance-id ]
undo ospfv3 timer retransmit [ interval ] [ instance instance-id ]
Default
The LSA retransmission interval for an interface in an instance is 5 seconds.
Views
Interface view
Default command level
2: System level