R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

400
Views
IS-IS view
Default command level
2: System level
Examples
# Create IS-IS process 1, and enable IPv6 for the process.
<Sysname> system-view
[Sysname] ipv6
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable
ipv6 filter-policy export
Use ipv6 filter-policy export to configure IPv6 IS-IS to filter redistributed routes before advertisement.
Use undo ipv6 filter-policy export to disable the filtering.
Syntax
ipv6 filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name | route-policy route-policy-name } export
[ protocol [ process-id ] ]
undo ipv6 filter-policy export [ protocol [ process-id ] ]
Default
The filtering is disabled.
Views
IS-IS view
Default command level
2: System level
Parameters
acl6-number: Specifies a basic or advanced IPv6 ACL by its number in the range of 2000 to 3999 to
filter redistributed routes before advertisement. For ACL information, see ACL and QoS Configuration
Guide.
ipv6-prefix-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 19 characters, to
filter the redistributed routes before advertisement. For IPv6 prefix list information, see Layer 3—IP
Routing Configuration Guide.
route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters, to
filter the redistributed routes before advertisement. For routing policy information, see Layer 3—IP
Routing Configuration Guide.
protocol: Filters routes redistributed from the specified routing protocol, which can be bgp4+, direct,
isisv6, ospfv3, ripng or static. If no protocol is specified, routes redistributed from all protocols are
filtered.
process-id: pecifies a process by its ID in the range of 1 to 65535. This argument is available when the
protocol is isisv6, ospfv3 or ripng.