R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

419
Field Descri
p
tion
Negotiated: send
Negotiation result: The local BGP router can send Router-refresh
messages carrying the ORF information, and the peer can
receive Router-refresh messages carrying the ORF information.
If receive is displayed, the local BGP router can receive
Router-refresh messages carrying the ORF information, and the
peer can send Router-refresh messages carrying the ORF
information. This field is not displayed if neither the send nor the
receive capability is supported.)
Peer Preferred Value Preferred value of the routes from the peer.
IPsec policy name IPsec policy applied to the peer group.
SPI SPI of the IPsec policy.
Routing policy configured A routing policy is configured.
No routing policy is configured No routing policy is configured.
Members Group members.
Peer IPv6 address of the peer.
AS AS number.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent.
PrefRcv Number of prefixes received.
Up/Down
Lasting time of a session/lasting time of current state (when no
session is established).
State State machine state of peer.
display bgp ipv6 network
Use display bgp ipv6 network to display IPv6 routes advertised with the network command.
Syntax
display bgp ipv6 network [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.