R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

422
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no parameter is specified, information about all peers and peer groups is displayed.
Examples
# Display all IPv6 peer information.
<Sysname> display bgp ipv6 peer
BGP local router ID : 192.168.1.40
Local AS number : 100
Total number of peers : 1 Peers in established state : 0
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2001::1 100 0 0 0 0 00:02:02 Active
Table 95 Command output
Field Descri
p
tion
BGP local router ID Local router ID.
Local AS number Local AS number.
Total number of peers Total number of BGP peers.
Peers in established
state
Number of established BGP peers.
Peer IPv6 address of the peer.
AS AS number.
MsgRcvd Messages received.
MsgSent Messages sent.
OutQ Messages to be sent.
PrefRcv Number of prefixes received.
Up/Down Duration of a session/duration of current state (when no session is established)
State Peer state.
# Display detailed information about IPv6 peer 1::1.
<Sysname> display bgp ipv6 peer 1::1 verbose
BGP Peer is 1::1, remote AS 100,
Type: EBGP link