R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

425
Field Descri
p
tion
Peer Preferred Value Preferred value assigned to routes received from the peer.
IPsec policy name: policy001, SPI: 300 IPsec policy applied to the peer and SPI of the IPsec policy.
BFD Indicates whether BFD is enabled over the link to the IPv6 BGP peer.
# Display the log information for the IPv6 peer 20::21.
<Sysname> display bgp ipv6 peer 20::21 log-info
Peer : 20::21
Date Time State Notification
Error/SubError
10-Jul-2008 15:46:17 Down Send Notification with Error 1/1
Message Header Error/Connection Not Synchronized
10-Jul-2008 09:23:00 Up
10-Jul-2008 07:46:17 Down Receive Notification with Error 3/2
UPDATE Message Error/Unsupported optional Parameter
10-Jul-2008 06:23:00 Up
10-Jul-2008 05:46:17 Down Send Notification with Error 6/4
Administrative Reset
Table 97 Command output
Field Description
Peer IPv6 address of the peer.
Date Date on which the Notification was sent or received.
Time Time at which the Notification was sent or received.
State
BGP session state:
• Up—The BGP session is up.
• Down—The BGP session is down.
Notification Notification message.
Error/SubError
Error refers to the error code, which identifies the type of the Notification.
SubError refers to the error subcode of the Notification, which identifies the specific
information about the reported error.
display bgp ipv6 peer received ipv6-prefix
Use display bgp ipv6 peer received ipv6-prefix to display the prefix entries in the ORF information for the
specified BGP peer.
Syntax
display bgp ipv6 peer { ip-address | ipv6-address } received ipv6-prefix [ | { begin | exclude | include }
regular-expression ]