R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

32
Examples
# Configure a static route, whose destination address is 1.1.1.1/24, next hop address is 2.2.2.2, tag value
is 45, and description information is for internet & intranet.
<Sysname> system-view
[Sysname] ip route-static 1.1.1.1 24 2.2.2.2 tag 45 description for internet & intranet
# Configure a static route for a VPN instance named vpn1: the destination address is 1.1.1.1/16 and the
next hop address is 1.1.1.2, which is the address of this VPN instance.
<Sysname> system-view
[Sysname] ip route-static vpn-instance vpn1 1.1.1.1 16 vpn-instance vpn1 1.1.1.2
Related commands
• display ip routing-table
• ip route-static default-preference
ip route-static default-preference
Use ip route-static default-preference to configure the default preference for static routes.
Use undo ip route-static default-preference to restore the default.
Syntax
ip route-static default-preference default-preference-value
undo ip route-static default-preference
Default
The default preference of static routes is 60.
Views
System view
Default command level
2: System level
Parameters
default-preference-value: Specifies a default preference for static routes, in the range of 1 to 255.
Usage guidelines
If no preference is specified for a static route, the default preference is used.
When the default preference is reconfigured, it applies to newly added static routes only.
Examples
# Set the default preference of static routes to 120.
<Sysname> system-view
[Sysname] ip route-static default-preference 120
Related commands
• display ip routing-table
• ip route-static