R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

448
peer bfd (IPv6 address family view/IPv6 BGP-VPN instance
view)
Use peer bfd to enable BFD over the link to a BGP peer.
Use undo peer bfd to restore the default.
Syntax
peer ipv6-address bfd
undo peer ipv6-address bfd
Default
BFD is not enabled for any BGP peer.
Views
IPv6 address family view, IPv6 BGP-VPN instance view
Default command level
2: System level
Parameters
ipv6-address: Specifies the IPv6 address of a peer.
Usage guidelines
After a link failure occurs, BFD might detect the failure before the system performs GR, and as a result, GR
will fail. Therefore, if GR capability is enabled for IPv6 BGP, use BFD with caution.
Examples
# Enable BFD over the link to BGP peer 100::1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname] ipv6-family
[Sysname-bgp-af-ipv6] peer 100::1 bfd
peer capability-advertise orf
Use peer capability-advertise orf to enable the ORF capability for a BGP peer or peer group.
Use undo peer capability-advertise orf to disable the ORF capability for the BGP peer or peer group.
Syntax
peer { group-name | ip-address | ipv6-address } capability-advertise orf ipv6-prefix { both | receive |
send }
undo peer { group-name | ip-address | ipv6-address } capability-advertise orf ipv6-prefix { both |
receive | send }
Default
The ORF capability is not enabled for a BGP peer or peer group.
Views
IPv6 address family view