R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

454

undo peer { group-name | ipv4-address | ipv6-address } default-route-advertise

Default

No default route is advertised to a peer or peer group.

Views

IPv6 address family view

Default command level

2: System level

Parameters

group-name: Specifies the name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.

ipv4-address: Specifies the IPv4 address of a peer.

ipv6-address: Specifies the IPv6 address of a peer.

route-policy-name: Specifies the name of a routing policy, a string of 1 to 63 characters.

Usage guidelines

Using this command does not require availability of the default route in the routing table. With this

command used, the router sends the default route unconditionally to the peer or peer group with the next

hop being itself.

Examples

# Advertise a default route to peer 1:2::3:4.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] peer 1:2::3:4 default-route-advertise

peer description (IPv6 address family view)

Use peer description to configure the description information for a peer or peer group.

Use undo peer description to remove the description information for a peer or peer group.

Syntax

peer { ipv6-group-name | ipv6-address } description description-text

undo peer { ipv6-group-name | ipv6-address } description