R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

455
ipv6-address: Specifies the IPv6 address of a peer.
description-text: Specifies the description information for the peer or peer group, a string of 1 to 79
characters.
Usage guidelines
You need create a peer or peer group before configuring a description for it.
Examples
# Configure the description for the peer group test as ISP1.
<Sysname] system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test description ISP1
peer ebgp-max-hop (IPv6 address family view)
Use peer ebgp-max-hop to allow establishing the EBGP connection to a peer or peer group indirectly
connected.
Use undo peer ebgp-max-hop to remove the configuration.
Syntax
peer { ipv6-group-name | ipv6-address } ebgp-max-hop [ hop-count ]
undo peer { ipv6-group-name | ipv6-address } ebgp-max-hop
Default
The value is 64.
Default
This feature is disabled.
Views
IPv6 address family view
Default command level
2: System level
Parameters
ipv6-group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ipv6-address: Specifies the IPv6 address of a peer.
hop-count: Specifies the maximum hop count in the range of 1 to 255.
Usage guidelines
You can use the argument hop-count to specify the maximum router hops of the EBGP connection.
Examples
# Allow establishing the EBGP connection with the peer group test on an indirectly connected network.
<Sysname> system-view
[Sysname] bgp 100