R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

41
Peer Aging Permanent Garbage
111.1.1.2 1 0 0
Total 1 0 0
Table 12 Command output
Field Description
Peer IP address of a neighbor.
Aging Total number of aging routes learned from the specified neighbor.
Permanent Total number of permanent routes learned from the specified neighbor.
Garbage
Total number of routes in the Garbage-collection state learned from the specified
neighbor.
Total Total number of routes learned from all RIP neighbors.
filter-policy export (RIP view)
Use filter-policy export to configure RIP to filter redistributed routes. Only routes not filtered out can be
advertised.
Use undo filter-policy export to remove the filtering.
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol [ process-id ] | interface-type
interface-number ]
undo filter-policy export [ protocol [ process-id ] | interface-type interface-number ]
Default
RIP does not filter redistributed routes.
Views
RIP view
Default command level
2: System level
Parameters
acl-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter redistributed routes.
ip-prefix ip-prefix-name: Specifies an IP prefix list by its name, a string of 1 to 19 characters, to filter
redistributed routes.
protocol: Filters routes redistributed from a specified routing protocol, which can be bgp, direct, isis, ospf,
rip, or static.
process-id: Specifies the process ID of the specified routing protocol, in the range of 1 to 65535. Specify
a process ID when the routing protocol is rip, ospf, or isis.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If a protocol is specified, RIP filters only the routes redistributed from the specified routing protocol.
Otherwise, RIP filters all routes to be advertised.