R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

55
Examples
# Configure Ethernet 1/1 to add a metric of 6 for the inbound route 1.0.0.0/8 and to add a metric of
2 for other inbound routes.
<Sysname> system-view
[Sysname] ip ip-prefix 123 permit 1.0.0.0 8
[Sysname] route-policy abc permit node 0
[Sysname-route-policy] if-match ip-prefix 123
[Sysname-route-policy] apply cost 6
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] rip metricin route-policy abc 2
rip metricout
Use rip metricout to configure an interface to add a metric to outbound routes.
Use undo rip metricout to restore the default.
Syntax
rip metricout [ route-policy route-policy-name ] value
undo rip metricout
Default
The additional metric for outbound routes is 1.
Views
Interface view
Parameters
route-policy route-policy-name: Specifies the name of a routing policy used to add an additional metric
for the routes matching it. The name is a string of 1 to 63 case-sensitive characters.
value: Adds an additional metric to outbound routes, in the range of 1 to 16.
Usage guidelines
With the command configured on an interface, the metric of RIP routes sent on the interface is increased.
If a routing policy is referenced with the route-policy keyword, the following operations can be
performed:
• Routes matching the policy are added with the metric specified in the apply cost command
configured in the policy. Routes not matching it are added with the metric specified in the rip
metricout command. The rip metricout command does not support the + or – keyword—used to
add or reduce a metric—specified in the apply cost command. For more information about the
apply cost command, see "Routing policy configuration commands."
• If the apply cost command is not configured in the policy, all the advertised routes are added with
the metric specified in the rip metricout command.
Examples
# Configure Ethernet 1/1 to add a metric of 6 for the outbound route 1.0.0.0/8 and to add a metric of
2 for other outbound routes.
<Sysname> system-view
[Sysname] ip ip-prefix 123 permit 1.0.0.0 8
[Sysname] route-policy abc permit node 0