R2511-HP MSR Router Series Layer 3 - IP Routing Command Reference(V5)

84
Area: 0.0.0.1
IP Address Type State Cost Pri DR BDR
172.16.0.1 Broadcast DR 1 1 172.16.0.1 0.0.0.0
Table 18 Command output
Field Descri
p
tion
Area Area ID of the interface.
IP address Interface IP address (regardless of whether TE is enabled or not).
Type Interface network type: PTP, PTMP, Broadcast, or NBMA.
State
Interface state defined by interface state machine:
• Down—No protocol traffic is sent or received on the interface.
• Loopback—The interface is in loopback state. A loopback interface can only
collect interface information.
• Waiting—The interface starts sending and receiving Hello packets and the
router is trying to determine the identity of the (Backup) designated router for
the network.
• p-2-p—The interface will send Hello packets at the interval of HelloInterval,
and try to establish an adjacency with the neighbor.
• DR—The router itself is the designated router on the attached network.
• BDR—The router itself is the backup designated router on the attached
network.
• DROther—The router is a DROther router on the attached network.
Cost Interface cost.
Pri Router priority.
DR DR on the interface's network segment.
BDR BDR on the interface's network segment.
display ospf lsdb
Use display ospf lsdb to display LSDB information.
Syntax
display ospf [ process-id ] lsdb [ brief | [ { asbr | ase | network | nssa | opaque-area | opaque-as |
opaque-link | router | summary } [ link-state-id ] ] [ originate-router advertising-router-id |
self-originate ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
brief: Displays brief LSDB information.
asbr: Displays Type-4 LSA (ASBR Summary LSA) information in the LSDB.