R2511-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V5)

145
Binding an IS-IS process with MIBs
This task allows you to bind MIB with an IS-IS process to send and collect information. For more
information about MIB, see Network Management and Monitoring Configuration Guide.
To bind an IS-IS process with MIBs:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter IS-IS view.
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
3. Bind the IS-IS process with
MIBs.
isis mib-binding process-id
By default, MIBs are bound with
IS-IS process 1.
Configuring BFD for IS-IS
To enable BFD on an IS-IS interface:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type interface-number N/A
3. Enable IS-IS on the interface.
isis enable [ process-id ] Disabled by default.
4. Enable BFD on the IS-IS
interface.
isis bfd enable Not enabled by default.
Displaying and maintaining IS-IS
Task Command Remarks
Display brief IS-IS configuration
information.
display isis brief [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display the status of IS-IS debug
switches.
display isis debug-switches { process-id |
vpn-instance vpn-instance-name } [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display the IS-IS GR state.
display isis graceful-restart status [ level-1 |
level-2 ] [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display information about IS-IS
enabled interfaces.
display isis interface [ statistics | [ interface-type
interface-number ] [ verbose ] ] [ process-id |
vpn-instance vpn-instance-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.