R2511-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V5)

4. Verify the configuration:

# Display the IP routing table of Router A.

[RouterA] display ip routing-table

Routing Tables: Public

Destinations : 7 Routes : 7

Destination/Mask Proto Pre Cost NextHop Interface

0.0.0.0/0 Static 60 0 1.1.4.2 Eth1/2

1.1.2.0/24 Direct 0 0 1.1.2.3 Eth1/1

1.1.2.3/32 Direct 0 0 127.0.0.1 InLoop0

1.1.4.0/30 Direct 0 0 1.1.4.1 Eth1/2

1.1.4.1/32 Direct 0 0 127.0.0.1 InLoop0

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

# Display the IP routing table of Router B.

[RouterB] display ip routing-table

Routing Tables: Public

Destinations : 10 Routes : 10

Destination/Mask Proto Pre Cost NextHop Interface

1.1.2.0/24 Static 60 0 1.1.4.1 Eth1/1

1.1.3.0/24 Static 60 0 1.1.5.6 Eth1/2

1.1.4.0/30 Direct 0 0 1.1.4.2 Eth1/1

1.1.4.2/32 Direct 0 0 127.0.0.1 InLoop0

1.1.5.0/30 Direct 0 0 1.1.5.5 Eth1/2

1.1.5.5/32 Direct 0 0 127.0.0.1 InLoop0

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

1.1.6.0/24 Direct 0 0 1.1.6.1 Eth1/3

1.1.6.1/32 Direct 0 0 127.0.0.1 InLoop0

# Use the ping command on Host B to test the reachability of Host A (Windows XP runs on the two

hosts).

C:\Documents and Settings\Administrator>ping 1.1.2.2

Pinging 1.1.2.2 with 32 bytes of data:

Reply from 1.1.2.2: bytes=32 time=1ms TTL=126

Ping statistics for 1.1.2.2:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 1ms, Maximum = 1ms, Average = 1ms

# Use the tracert command on Host B to test the reachability of Host A.