R2511-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V5)
251
Ste
p
Command
Remarks
5. Set the community attribute for
BGP routes.
apply community { none | additive |
{ community-number&<1-16> |
aa:nn&<1-16> | internet |
no-advertise | no-export |
no-export-subconfed } * [ additive ] }
Optional.
Not set by default.
6. Set a cost for routing
information.
apply cost [ + | - ] value
Optional.
Not set by default.
7. Set a cost type for routing
information.
apply cost-type [ external | internal
| type-1 | type-2 ]
Optional.
Not set by default.
8. Set the extended community
attribute for BGP routes.
apply extcommunity { { rt
route-target }&<1-16> [ additive ] |
soo site-of-origin additive }
Optional.
Not set by default.
9. Set the next hop.
• Set the next hop for IPv4 routes:
apply ip-address next-hop
ip-address
• Set the next hop for IPv6 routes:
apply ipv6 next-hop
ipv6-address
Optional.
Not set by default.
10. Inject routing information to a
specified ISIS level.
apply isis { level-1 | level-1-2 |
level-2 }
Optional.
Not configured by default.
11. Set the local preference for
BGP routing information.
apply local-preference preference
Optional.
Not set by default.
12. Set MPLS label.
apply mpls-label
Optional.
Not set by default.
13. Set the origin attribute for BGP
routes.
apply origin { egp as-number | igp |
incomplete }
Optional.
Not set by default.
14. Set the preference for the
routing protocol.
apply preference preference
Optional.
Not set by default.
15. Set a preferred value for BGP
routes.
apply preferred-value
preferred-value
Optional.
Not set by default.
16. Set a tag value for RIP, OSPF or
IS-IS route.
apply tag value
Optional.
Not set by default.
Configuring a continue clause
Follow these guidelines when you configure a continue clause:
• If you configure the same apply clause that set different values (including the apply community and
apply extcommunity clauses with the additive keyword) on nodes that are combined by the
continue clause, the apply clause configured on the last matching node takes effect.










